Zeus All-In-One User Manual
Page | 7
5. Internal Specifications
Zeus has an internal heater with a 4-temperature sensor monitored by a Micro-Controller Unit (MCU).
When Zeus is off and the ambient temperature is below -20°C, the MCU will hold the power button,
activate the heater, and heat the device until it is above -20 °C. A powered-on MCU will monitor for
high temperatures. When the temperature is over 40 °C, the MCU will start the FANs of the system.
WARNING: Zeus has no internal serviceable components and opening it voids the warranty.
To Previous Page
Loading...