Why the main motor cannot be detected in iDTRONIC ID GATE 8900 Fencing & Gates?
The main motor might not be detected in your iDTRONIC Fencing & Gates system because the hall cable or motor cable is incorrectly connected, or the motor hall is faulty.
What to do if iDTRONIC ID GATE 8900 turnstile doesn't automatically open after power off?
If the turnstile automatically opens after a power outage, but it does not, ensure that the storage battery has sufficient power.
What to do if the arms open but fail to close in iDTRONIC ID GATE 8900?
If the arms open but fail to close on your iDTRONIC Fencing & Gates, check the infrared sensor to ensure it is properly matched.
How to fix if the arm doesn't work together in iDTRONIC ID GATE 8900 Fencing & Gates?
If the arm doesn't work together in your iDTRONIC Fencing & Gates, check if the sync wires are well connected.
What to do if indicator doesn’t light or indicate wrong direction in iDTRONIC Fencing & Gates?
If the indicator on your iDTRONIC Fencing & Gates doesn't light up or indicates the wrong direction, try exchanging the inside wires to test it.
What to do if the arm doesn’t open after swiping card in iDTRONIC ID GATE 8900 Fencing & Gates?
If the arm doesn’t open after swiping a card on your iDTRONIC Fencing & Gates, recheck whether all the wires are well connected.
General| Brand | iDTRONIC |
|---|---|
| Model | ID GATE 8900 |
| Category | Fencing & Gates |
| Language | English |
To Next Page