3
BEFORE USING, PLEASE READ ALL INSTRUCTIONS
SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock, or injury when using your cooler,
please note the following basic precautions:
• Never clean appliance parts with flammable fluids.
• Do not store or use gasoline or any other flammable vapors and liquids in the
vicinity of this or any other appliance. The fumes can cause a fire or explosion.
• As with all electrical appliances, please consult a licensed repair technician
for any repairs.
INSTALLATION
• Keep cooler in an upright position for 1-hour prior to use. This is essential for
proper operation.
If the cooler is transported in the horizontal position, the cooler must be returned to
the upright position and not plugged in for 1 hour.
• Remove all the packing material before using your cooler.
• Clean the interior surface with a soft cloth and lukewarm water.
• If the cooler is transported in the horizontal position, check the drain pan and ensure that
it is properly positioned above the compressor.
• For proper operation, place the cooler on a dry, level surface.
• Place the cooler at least 4” away from any walls. Otherwise, this could cause damage to
the electrical cord and block the air circulation to the appliance.
ELECTRIC CONNECTION
• This model operates with an 115V-60Hz-power supply. Check the electrical outlet for
proper voltage.
• Warning: Plug unit directly into wall outlet. Do not use an extension cord or any other
multiple connectors, this could cause compressor failure.
• For your safety, plug the unit into a grounded wall outlet.
To Next Page
Loading...
Need help?
General
