IEI Technology ICEFIRE2-T10 User Manual

ICEFIRE2-T10 Mobile Clinic Assistant
Page 91
6.3.6.1 Serial Port 1 Configuration
Use the Serial Port n Configuration menu (6BIOS Menu 9) to configure the serial port 1
on the docking station.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings Reset Required
Change Settings [Auto]
E
nable or Disable Serial
Port (COM)
---------------------
 : Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 9: Serial Port 1 Configuration Menu
6.3.6.1.1 Serial Port 1 Configuration
 Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled
Disable the serial port

Enabled DEFAULT
Enable the serial port
 Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto DEFAULT
The serial port IO port address and interrupt address
are automatically detected.

IO=3F8h;
IRQ=4
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ4

IEI Technology ICEFIRE2-T10 Specifications

General

Brand	IEI Technology
Model	ICEFIRE2-T10
Category	Touch Panel
Language	English