ifi GO pod - User Manual

Thank you for purchasing this GO series pod. The GO pod is an Wearable HD Bluetooth DAC/headphone amp.
1. GO pod status indicator
LED Status
Charging: Steady Red
Fully charged: Light o
Awaiting connection: Flashing blue
Ready to pair: Alternately ash Red and Blue
Successfully paired: Light o
Factory Reset: Alternately ash Red and Green
2. Touch control area
- Play/Pause/Answer the call (Single tap)
- Reject/hang up (Double tap)
- Skip forward (Double tap)
- Skip back (Triple tap)
- Volume Up (Hold right)
- Volume Down (Hold left)
- Wake up voice assistant (Single tap then hold)
- Bluetooth Pairing (Hold left and right together for ≥ 3s)
- Power Reset (Hold for ≥12s)
3. Microphone
Built-in mic for hands-free calls when paired with your smartphone.
Tip: To wake up your phone's voice assistant, Single tap then hold the Touch control area (2).
1
2
1
2
3 3

Summary

GO pod Status Indicator

LED Status Information

Details on LED indications for charging, connection status, pairing, and factory reset.

Touch Control and Microphone Functions

Touch Control Operations

Instructions for single tap, double tap, triple tap, and hold gestures for playback and calls.

Microphone Usage

Information on the built-in microphone for hands-free calls and voice assistant activation.

Charging Inputs and Battery Status

USB-C and Wireless Charging

Specifications for charging the GO pod using USB-C and Qi wireless charging methods.

Charging Box LED Battery Levels

Explanation of LED indicators on the charging box for battery charge level status.

Bluetooth Connectivity

Bluetooth Pairing Process

Steps for manual Bluetooth pairing and auto-connecting to devices.

Connecting to Bluetooth Devices

Guidance on initiating and managing Bluetooth connections with the GO pod.

Single GO pod Mode

Instructions for using a single GO pod for Bluetooth connection.

Gaia App and Setup

Gaia App Integration

Details on setting up Bluetooth connection and managing settings via the iFi-Gaia app.

Ear Loop Connections

Information on connecting various ear loop types to the GO pod touch control units.

Technical Specifications

Device Specifications Overview

Comprehensive details on Bluetooth version, codecs, chipset, and impedance.

Battery and Charging Specs

Information on battery capacity, working hours, charging times, and power system requirements.

Dimensions and Weight

Physical dimensions and net weight for the GO pod ear hoods and charging box.

Overview

1. Function Description
2. Usage Features
3. Power and Charging
4. LED Status Indicators (GO pod)
5. Touch Controls
6. Microphone
7. Bluetooth Pairing and Connection
8. iFi-Gaia APP
9. Ear Loops
10. Maintenance Features
11. General Cautions

The iFi GO pod is a wearable HD Bluetooth DAC/headphone amplifier designed to enhance your audio experience with wireless convenience. This device integrates advanced Bluetooth technology with high-fidelity audio processing, allowing you to enjoy premium sound quality from your smartphone or other Bluetooth-enabled devices.

Function Description

The GO pod serves as a bridge between your audio source and your headphones, converting digital audio signals into analog sound with exceptional clarity and detail. It supports a wide range of Bluetooth codecs, ensuring compatibility with various devices and delivering optimal audio performance. The device is designed to be worn with ear loops, providing a secure and comfortable fit for extended listening sessions.

Usage Features

Power and Charging:

The GO pod comes with a charging case that not only protects the ear loops but also recharges them. The charging case itself can be charged via a 5V/1A USB-C input or a 5V/1.5A Qi wireless charging input, offering flexible charging options. The charging box features an LED indicator to display its battery status, with four LEDs indicating charge levels from >75% down to <25%. When charging, the battery LEDs will flash and turn off once fully charged.

LED Status Indicators (GO pod):

The GO pod itself provides clear LED indicators for various operational statuses:

• Charging: Steady Red
• Fully charged: Light off
• Awaiting connection: Flashing blue
• Ready to pair: Alternately flash Red and Blue
• Successfully paired: Light off
• Factory Reset: Alternately flash Red and Green

Touch Controls:

Each GO pod features a touch control area for intuitive operation:

• Single tap: Play/Pause audio or Answer a call.
• Double tap: Reject/hang up a call or Skip forward to the next track.
• Triple tap: Skip back to the previous track.
• Hold right touch area: Increase Volume.
• Hold left touch area: Decrease Volume.
• Single tap then hold: Wake up your phone's voice assistant.
• Hold left and right together for ≥ 3s: Initiate Bluetooth Pairing manually.
• Hold for ≥12s: Perform a Power Reset.

Microphone:

The GO pod includes a built-in microphone, enabling hands-free calls when paired with your smartphone. This feature allows you to manage calls without needing to remove your device or headphones.

Bluetooth Pairing and Connection:

• Automatic Pairing: When removed from the charging case, the GO pod's LED blinks blue as it automatically searches for a previously paired device. If no stored device is found, it enters pairing mode with the LED blinking blue and red.
• Manual Pairing: To manually enter pairing mode, press the left and right touch areas together for at least 2 seconds until the LED flashes red/blue.
• Device Storage: The GO pod can store up to 8 paired Bluetooth devices, although manual reconnection may occasionally be necessary.
• Connecting to a Device: To connect, simply turn on your phone's Bluetooth function and select "GO pod" from your Bluetooth list.
• Auto-connecting (Dual Pods): When both GO pods are taken out of the charging case, they automatically switch on and connect to each other. The GO pods will flash blue lights to indicate they are pairing with each other. Once successfully paired, one GO pod will alternately flash red and blue, while the other will flash blue.
• Single-GO pod Mode: You can use either the right or left GO pod independently. Removing one from the charging case will automatically turn it on, and you can select "GO pod" (Left GO pod) or "GO pod" (Right GO pod) in your Bluetooth list to connect.
• Automatic Shutdown: If the GO pod fails to connect to Bluetooth for more than 5 minutes, it will automatically shut down to conserve power.
• Power Off: The GO pod automatically switches off when placed back into the charging case.
• Proximity for Pairing: For optimal pairing, keep the left and right GO pods within 15 CM of each other when taking them out of the charging case.

iFi-Gaia APP:

To fully utilize all functions and settings, including digital filters for sound adjustment and GO pod resetting, download the iFi-Gaia app. Search for "GO pod" within the app to connect and manage your device. The app is available on both the App Store and Google Play.

Ear Loops:

The GO pod comes with three pairs of ear loops to ensure compatibility with various headphone types: 0.78mm 2-pin, MMCX, and Pentaconn Ear. These ear loops connect to the GO pod touch control units, allowing you to attach your preferred in-ear monitors or headphones.

Maintenance Features

General Cautions:

• Environmental Conditions: Avoid exposing the GO pod to extreme heat, cold, or humidity to prevent damage.
• Physical Handling: Do not drop or crush the GO pod. Avoid stressing the ear loops by rapid pulling or applying extreme force, and do not bend them at sharp angles.
• Comfort and Health: If you experience discomfort or pain while using the product, try lowering the volume or discontinuing use temporarily. If you experience regular discomfort, discontinue use and consult a physician.
• Charging Case Protection: Always ensure the GO pod is completely dry before placing it in the charging case to prevent damage to the case.

By following these guidelines, you can ensure the longevity and optimal performance of your iFi GO pod, enjoying a superior wireless audio experience.

ifi GO pod Specifications