ifi ZEN Blue User Manual

•
I
ZEN Blue
0
0
2 3
Thank you for purchasing the Blue from the ZEN series. The Blue
is a wireless Bluetooth DAC with digital and analogue outputs .
1. Bluetooth pairing button
The ZEN Blue receives a Bluetooth signal via aptX, aptX HD ,
LDAC*, HWA*, AAC and SBC.
2. Bluetooth pairing/codec display
Pairing
From switch on, the ZEN Blue will blink blue as it searches for a
previously paired device. If a stored device is not found, it will
automatically enter pairing mode and blink blue / red.
To enter pairing mode , press and hold the front leftmost button
until the ' BI uetoo th mode LED ' is blinking blue /red. To pair, on
your handset, look for 'iFi Hi-Res audio ' in the list of available
Biuetooth devices.
The ZEN Blue is able to store up to 7 paired Bluetooth devices.
Codec
The colour of the 'iFi' l ogo in the centre of the front display
represents the file format received:
Format LED
AAC
aptX
aptX HD
LDAC*
HWA*
SBC
3. kHz LED
44 / 48
88 / 96
Yellow
Blue
Magenta
Cyan
White
Green
Blue
White

ifi ZEN Blue Specifications

General

Bluetooth Version	5.0
Analog Output	RCA
Frequency Response	20Hz - 20kHz
THD+N	< 0.0015%
Bit Depth	24-bit
Dimensions	158 x 100 x 35 mm
Weight	476g
Bluetooth Codecs	aptX, aptX HD, AAC, SBC
Digital Output	Coaxial, Optical
Power Supply	DC 5V/1A
Sample Rate	Up to 192kHz/24-Bit
Output Voltage	2.1V