ifi ZEN Blue - Connections and Power; Balanced and RCA Outputs; Digital Outputs and Antenna; DC 5 V Power Supply

Add Hi-Res wireless to your HiFi System.
The ZEN Blue supports Bluetooth up to 24 bits/96kHz. Plus some iFi magic ensures you don’t suffer the 40%
quality drop found with standard Bluetooth.
Control your music via Bluetooth with your favourite music app on your smart device or computer and relax.
New aerial gives increased coverage up to 70-80%
New and improved low jitter clock gives a >20dB better performance
Chill with the best of both worlds. Connect via analogue RCA to your amp or active speaker. Use the digital
SPDIF coaxial/optical connection to boost audio on your TV.
Regain your balance with the 4.4mm balanced output. Connect to a balanced amplifier or use 4.4mm > XLR to
hook up to pro level active speakers.
The ZEN Blue can connect to up to 8 Bluetooth devices. Perfect for the connected home.
Features:
Bluetooth receiver (aptx, aptX HD, aptX Adaptive, aptX LL, LDAC, HWA, AAC and SBC) up to 24/96kHz
Analogue outputs: Balanced 4.4mm/Single-Ended RCA
Digital S/PDIF outputs: Coax/Optical
Contents:
1 x ZEN Blue V2
1 x Power Adapter
1 x RCA Cable
2 x Antenna
1 x User Manual
1 x Instruction card
Specifications:
Power Source: DC 5V
Chipset: Qualcomm QCC 5100 Series TM
Input: Bluetooth 5.0 with SBC, AAC, aptX, aptX HD, aptX Adaptive, aptX LL, LDAC, LHDC/HWA Codec
Output: Optical/Coaxial, Audio RCA L/R, 4.4 Balanced Lineout Frequency Response: 20Hz – 20kHz +0/-0.5dB
(44.1kHz) 1Hz – 44khz +0/-3.0dB (>= 88.2kHz)
Output Voltage @ 0dBFS: 2.05V (+/-0.05V)
Dynamic Range: 109dB (A)
Signal/Noise ratio: 109dB (A) @ 0dBFS
THD & N @ 0dBFS: <0.0015% 10k Load
Output Impedance: <50Ω
Power Consumption: <2.5W
Dimensions: 158 x 100 x 35 mm 6.2″ x 3.9″ x 1.4″
Net weight: 476g (1.05 lbs)
Warranty period: 12 months
Specications are subject to change without notice
File Downloads