Need help?Do you have a question about the IFM Electronic G1501S and is the answer not in the manual?
General| Short-circuit protection | Yes |
|---|---|
| Overload protection | Yes |
| Reverse polarity protection | Yes |
| Protection class | IP67 |
| Housing material | Plastic |
| Output status indication | LED |
| Contact configuration | 1 NO |
| Ambient temperature | -25 to 70 °C |
| Output function | normally open |
| Connection | M12 connector |
| Operating temperature | -25 to 70 °C |
Explanation of symbols used in the operating instructions.
Specifies requirements for hardware configuration and product compatibility.
Details on the device's indicators, terminals, and connection points.
Diagram illustrating the internal functional blocks of the safety relay.
Information on connecting the power supply voltage to the unit.
Details on feedback contacts and configuration for automatic or monitored start.
Instructions for connecting the load to the output terminals.
Connection, function, and fault diagnosis for 2 PNP output sensors.
Connection, function, and fault diagnosis for clocked fail-safe sensors.
Connection, function, and fault diagnosis for two-hand control with electronic sensors.
Connection, function, and fault diagnosis for two-hand control with mechanical switches.
Connection, function, and fault diagnosis for mechanical switches without simultaneity monitoring.
To Next Page
