Need help?Do you have a question about the IFM Electronic TN2511 and is the answer not in the manual?
General| Protection class | IP67 |
|---|---|
| Media temperature | -40...150 °C |
| Electrical connection | M12 connector |
| Operating temperature | -25...80 °C |
| Process connection | G 1/2 |
| Output function | Normally open / normally closed |
| Switching output DC voltage | 24 V DC |
| Switching output AC voltage | 250 V AC |
| Housing materials | Stainless steel, PBT |
| Type of pressure | Not applicable |
| Materials (wetted parts) | Stainless steel (316L / 1.4404) |
| Input type | Pt1000 |
| Housing material | PBT |
Explains hysteresis and window functions for OUT1 switching based on temperature limits.
Describes conversion of measured signal to temperature-proportional analogue output signals.
Details current output (4-20 mA, 20-4 mA) and scaling options for analogue signals.
Details voltage output (0-10 V, 10-0 V) and scaling options for analogue signals.
Outlines the general steps and considerations for setting parameters on the unit.
Describes the procedure to restore all unit parameters to their original factory default settings.
Lists common warning messages and their meanings for device errors and self-diagnostic status.
To Next Page
