EasyManua.ls Logo

IFM AL1100 User Manual

IFM AL1100
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating Instructions
IO-Link Master with Profinet interface
StandardLine
4 Ports
IP 65 / IP 67
AL1100
ifm firmware: 1.1.22 or higher
LR DEVICE: 1.0.x or higher
IO-Link: 1.1.2
English
7391108_01_UK 2017-08-18

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the IFM AL1100 and is the answer not in the manual?

IFM AL1100 Specifications

General IconGeneral
BrandIFM
ModelAL1100
CategoryRecording Equipment
LanguageEnglish

Summary

Safety instructions

Tampering with the unit

Details the prohibition of tampering with the unit and its consequences.

Function

Communication, parameter setting, evaluation

Covers communication, setting parameters, and evaluating device data.

Mounting

Mount the device

Instructions on how to properly install and mount the device.

Electrical connection

Ethernet ports

Details on connecting the device via its Ethernet ports.

IO-Link ports

Information regarding the connection of IO-Link devices to the ports.

Operating and display elements

Configuration

LR DEVICE: Configure the device

Steps for configuring the device using the LR DEVICE software.

LR DEVICE: Configure IO-Link devices

How to configure connected IO-Link devices with LR DEVICE.

Profinet: Configure the device

Steps for configuring the device via Profinet.

Profinet: Configure IO-Link devices

How to configure IO-Link devices using Profinet.

Operation with Profinet connection (without LR DEVICE)

Operation with Profinet connection and LR DEVICE/LR SmartObserver

Offline parameter setting

LR DEVICE: Configure the device

Set-up

Initial setup steps for configuring the device with LR DEVICE.

Configure the Ethernet interface

Configuring the network settings for the device's Ethernet interface.

Configure the interface to the SmartObserver

Setting up the connection and parameters for SmartObserver.

Set the operating mode of the IO-Link ports

Configuring the operational mode for each IO-Link port.

LR DEVICE: Configure IO-Link devices

Offline parameter setting: Add IO-Link devices manually

Profinet: Configure the device

Add the device to the Profinet network

Steps to integrate the AL1100 into the Profinet network.

Configure communication profile

Setting communication profiles for Profinet operation.

Configure the Profinet interface

Setting up the Profinet interface parameters for the device.

Profinet: Configure IO-Link devices

Profinet: Programmers' notes

Read and write I&M datasets

Detect diagnostics and alarms

Configure IO-Link devices

Operation

Web interface: Read device and diagnostic information

LR DEVICE: Read device information

Profinet: Read & write device information

Error detection and elimination

Firmware update

Exchange IO-Link device

Factory settings

Diagnostic and alarms