Ifor Williams Trailers TT2012 User Manual

Page | 1
Owner’s Manual – Tipper and Tiltbed Trailers
Tipping Trailers – TT2012, TT2515, TT3017, TT3621
Tiltbed Trailers – CT166, CT167, CT177, TB4021, TB4621, TB5021, TB5521
Please enter the following information for your own records:
Trailer Model: (from Manufacturers plate)
VIN Number: (from Manufacturers Plate)
SCK
Date of purchase:
Purchased from:
Maximum Gross Weight (MGW):
Unladen Weight: (from CoC)
Payload: (MGW minus Unladen Weight)
Drawbar Security Code: (from RH drawbar)
Having recorded this information, please take a further moment to fill in and return the Guarantee
Registration Card. This is a big step towards protecting your trailer against theft.
It is suggested this page is removed from the manual (so that the manual can be kept with the trailer
without risk of losing both trailer and this important information) and kept in a place of safety with
the purchase receipt and the Certificate of Conformity*.
Manufacturer’s Plate
The trailer is fitted with a Manufacturer’s Plate to the right hand side drawbar which will show the
following information:
• The manufacturers name and address details
• The trailer model
• The trailer serial number
• Maximum gross weight for the trailer
Drawbar Security Code:
This is a code – numbers and letters – cut into the right-hand drawbar but only on TT, CT166 and
CT167 models. It is not on CT177, TT2012 and TB drawbars.
INTENDED USE
The following are permitted:
• (Tipper) Transport of loose aggregates,
wood chips
• (Tilt bed) Transport of wheeled or tracked
vehicles

Ifor Williams Trailers TT2012 Specifications

General

Brand	Ifor Williams Trailers
Model	TT2012
Category	Utility Vehicle
Language	English

Summary

INTENDED USE

Manufacturer's Plate

Details shown on the trailer's manufacturer's plate for identification and reference.

Drawbar Security Code

A specific code cut into the drawbar for security purposes on certain models.

General Information

1.1 Introduction

An introductory section for the owner's manual, emphasizing reading before use.

1.2 Overview of Trailer Types

Provides a summary of the different trailer types discussed in the manual.

Load Security

Operation – Tipping Trailers

3.1 Safe Operation of Tipping Trailers

Essential safety procedures and precautions for operating tipping trailers.

3.2 Use of the Safety Prop

Instructions on the correct and safe use of the safety prop for the trailer body.

3.3 Loading Tipping Trailers

Guidance on correct loading procedures for tipping trailers, ensuring proper weight distribution.

3.4 Unloading Tipping Trailers

Detailed instructions for unloading tipping trailers, covering different methods.

3.5 Loading Skids

Procedures for fitting and using loading skids for vehicles on tipping trailers.

3.6 Electric Winch

Information regarding the electric winch option and its operation, where applicable.

3.7 Component Removal and Replacement

Guide for removing and refitting trailer body components like sideboards and tailboards.

Operation – Tiltbed Trailers

4.1 Safe Operation of Tiltbed Trailers

Crucial safety guidelines and precautions for operating tiltbed trailers.

4.2 Loading Tiltbed Trailers

Comprehensive guide on loading vehicles and other rolling loads onto tiltbed trailers.

4.4 Using Tiltbed Trailers as Flat Trailers

How to use tiltbed trailers in a flat configuration without using the tilting function.

4.5 Fitting and Using Wheel Chock Kit

Instructions for fitting and using the wheel chock kit specifically on TB trailers.

4.6 Fitting and Using CT177 Ski-Jump Kit

Guide on installing and using the ski-jump kit for loading vehicles onto CT177 trailers.

Maintenance

5.2 Hydraulic System

Procedures for maintaining the hydraulic system, including checks and fluid management.

5.3 Battery

Information about the trailer's battery, its type, and safety precautions.

5.5 Tyres

Details on tyre maintenance, including pressure, load ratings, and interchangeability.

5.7.3 Wheel Bearings

Guidance on checking and maintaining trailer wheel bearings for proper function.

5.7.4 Brake Cables

Instructions for inspecting and maintaining the trailer's brake cables.

5.8 Coupling Maintenance

Procedures for checking and maintaining the trailer coupling, including bellows and head.

5.9 Breakaway Cable

Information on checking and replacing the vital breakaway cable for safety.

5.10 Suspension

Guidelines for inspecting the trailer's suspension components and their maintenance.

5.12 Washing

Recommendations for washing the trailer to prolong its finish and protect components.

Troubleshooting

End of Life Disposal

Technical Data

8.1 All Versions

General technical specifications applicable to all trailer versions covered in the manual.

8.2 Tipper

Specific technical data and specifications for Tipper trailer models.

8.3 Tiltbed - CT

Detailed technical data and specifications for CT series Tiltbed trailer models.

8.4 Tiltbed - TB

Technical data and specifications specific to TB series Tiltbed trailer models.