IFR COM-120B - Page 25

Rev. 1.0 Page 25
START
STOP
Test TX Distortion
Setup:
1. This COM-120B has been pre-configured for common transmitter test
setups.
2. Press the key to access the COM-120B System Setup
Utility software.
3. The menu to the right will appear.
4. Select STEP 5 by positioning the
cursor and pressing F1 Execute.
5. The COM-120B will configure itself
for testing Transmitter Distortion.
Interconnect:
1. Connect the Transmitter RF Output to the COM-120B’s T/R Input.
2. Connect the COM-120B’s Audio/Data Gen Out to the Radio’s
Microphone Input.
1
2
2