iGAZE TCOO900 - User Manual

iGAZE
®
REP KIT
BI-DIRECTIONAL
COMMUNICATION
Movable Device
TCOO900
Fixed Device
RCOO900P
INSTRUCTION MANUAL
v.05.24.18
Transceiver System for 10kΩ, or 8.2kΩ
Resistive Safety Edges
Pulsed output

Summary

Technical Specifications

Quick Start Guide

Configuration and Electrical Connections

DIP Switches Configuration for TCOO900

Connect Safety Edge to Movable Device

Synchronize DIP Switches Between Devices

Programming the System

Program TCOO900 on Channel 1 Output

Program movable device on channel 1 of the fixed device.

Program TCOO900 on Channel 2 Output

Program movable device on channel 2 of the fixed device.

Testing and Verification

Test Movable Device Programming Success

Verify System Functionality

Receiver Reset Procedure

Troubleshooting Common Issues

Check Safety Edge Wiring

Ensure safety edge wires are securely attached to the movable device.

Verify Safety Edge Type

Confirm the safety edge is resistive (8.2K or 10K).

Ensure Communication Frequency Match

Match TCOO900 and RCOO900P DIP switch settings for frequency.

Check TCOO900 Batteries

Resolve Communication Obstacles

iGAZE TCOO900 Specifications

General

Category	Transceiver
Frequency Range	902-928 MHz
Interface	UART
Model	TCOO900
Operating Voltage	3.3V
Current Consumption	30 mA