EasyManua.ls Logo

iGenix IG255X - Trouble Shooting Guide

iGenix IG255X
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
TROUBLESHOOTING
If you are having problems with your appliance, please use our troubleshooting guide below. If you are
unable to resolve the issue using this guide please ring our Customer Service Department on 0844 848
5861. Please have the model code and purchase information available.
Problem Possible Cause Solution
Appliance does
not work
Temperature regulation knob is
set to ‘0’
Set the knob to another number
to switch on the appliance
Mains plug is not plugged in or
is loose
Insert mains plug correctly
Fuse has blown or is defective Check fuse, replace if necessary
Socket is defective Mains malfunctions are to be
corrected by an electrician
The food is too
warm
Temperature is not properly
adjusted
Refer to the Temperature Setting
section
Door was open for an
extended period
Open the door only as long as
necessary
A large quantity of warm food
was placed in the appliance in
the last 24 hours
Turn the temperature regulation to
a colder setting temporarily
The appliance is near a heat
source
Please refer to the Installation
section
Appliance cools
too much
Temperature is set too cold Turn the temperature regulation
knob to a warmer setting
temporarily
Unusual noises
Appliance is not level Re-adjust the feet
The appliance is touching the
wall or other objects
Move the appliance slightly
A component, e.g a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall
If necessary, carefully bend the
component out of the way
Water on the
oor
Water drain hole is blocked See the Cleaning and Maintenance
section
Side panels are
hot
Normal. Heat exchange parts
are in the sides
Use gloves to touch sides

Related product manuals