Do you have a question about the Iget HOME Feeder 6L and is the answer not in the manual?
Switch to connection mode by holding for 7 sec until 'drop' sounds. Light illuminates (red/blue) for 6 sec and flashes.
Press and hold to record a message for your pet when dispensing food. Max 10 seconds. Release to end recording.
Briefly press to dispense one serving. Long press (10 sec) locks feeder function, confirmed by double red LED flash.
Indicates feeder status: red flashing for mode change/locking, blue steady for normal operation, blue flashing for Wi-Fi connection.
Scan QR codes for iGET HOME app download. Follow on-screen prompts to add device, connect to 2.4GHz Wi-Fi, and pair.
Initiate manual feeding or set a feeding plan within the app, specifying days, hours, and portion sizes.
Clean feed hopper and bowl with a cleaning agent to prevent bacterial contamination. Use desiccant in humid environments.
Place on flat floor, use dry fodder (2-12mm), secure against tipping. For pets up to 20kg. Adult supervision for children.
Can use D-type batteries for power failure backup. App requires 2.4GHz Wi-Fi band. Keep router within 10m, avoid thick walls.
Do not immerse in water. Operate between 10-50°C. Proper disposal of electrical equipment is mandatory.
Contact dealer for repairs or issues. Do not disassemble. Risk of electric shock if covers are opened or device is reassembled incorrectly.
Device complies with Directive 2014/53/EU. 24-month warranty. Meets RoHS restrictions for hazardous substances.
| Brand | Iget |
|---|---|
| Model | HOME Feeder 6L |
| Category | Pet Care Product |
| Language | English |
Loading...