Ignis ADL 831 - Page 9

-HOW
TO
FILL
THE
WATER
SOFTENER
The water softener must be filled prior to first use.
Then check periodically.
1. Fill in the salt.
@ Remove the lower basket.
@ Unscrew the cover.
@ Put in the funnel.
@
Fillin
the
salt.
Only
use
regenerating
salt
for
dish-
washers
(if the
dishwasher
is
new,
pour
1
litre
of
water
in
the
reservoir
first).
@ Fill the salt to the edge (max. 2 kg) then stir with
the handle of a spoon.
@
Tighten
the
cover
and
start
a
wash
programme
immediately.
® Failure to operate your dishwasher immediately
can
cause
some
corrosion.
(Using
the
pre-wash
is not enough).
SALT LEVEL INDICATOR
Your
dishwasher
is
equipped
with
a
mechanical
indica-
tor.
The
green
floater
sinks
as
the
level
drops.
@ Refill with salt when the floater is no longer clearly
visible.
20