CONSUMPTION DATA
SELECTING THE PROGRAMME
1. Turn the programme selector knob clockwise to the desired programme.
2. Set the temperature knob to the desired temperature.
PRESS THE DESIRED SPECIAL OPTION BUTTON
No spin button
• Press this button to exclude the spin function from the programme.
Rinse hold/Spin delay button
• The laundry remains in the last rinse water without being spun, to avoid heavy
creasing.
• Especially suitable for the “Synthetic” or “Delicate” programmes, if the laundry is not to
be unloaded immediately after the end of the programme.
Stopping Rinse hold
Press the Rinse hold button again; the load will be spun according to the selected
programme.
PROGRAMME START
1. Plug in the appliance.
2. Turn on the water supply tap.
3. Press the “ON/OFF” button.
DOOR LOCK
The door locks automatically after the programme start until the end of the programme.
PROGRAMME END
• The programme sequence indicator is at “Stop”.
1. Press the “ON/OFF” button.
2. Cancel the special options by pressing the appropriate buttons.
3. Turn the water supply tap(s) off.
4. Wait for the door to unlock (about 2 minutes).
5. Open the door and unload the machine.
Note:
Do not fully close the door but leave it ajar to allow the drum to dry out.
PROGRAMME RESELECTION
1. Press the “ON/OFF” button.
2. Select the new programme, temperature and relative options.
3. Press the “ON/OFF” button.
Programme Water Energy Programme
duration
(l) (kWh) (min.)
Cotton 95 °C
with pre-wash
180 2,00 120
Cotton 95 °C 2 70 1,80 110
Cotton 60 °C 2 70 1,20 110
Synthetic 60 °C 3 60 0,90 85
Cotton short 40 °C
Synthetic 40 °C
465
60
0,70
0,60
75
75
Delicate 40 °C 5 80 0,60 70
Wool 40 °C 6 80 0,60 65
GB
5019 100 00006
To Previous Page
Loading...
