EasyManua.ls Logo

Ignis EB1400 - Ethanol Burner Operation Instructions; Step 1: Filling the Burner; Step 2: Igniting the Burner

Ignis EB1400
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.ignisproducts.com
Operation Instructions
Step 1: Adjust the sliding lid to its widest opening. Fill the burner with the ethanol,
watch carefully untill you reach under the level of the “Max” line. Do not overfill or
spill.
CAUTION: Please ensure your pebbles or logs are not covering the opening in case of
accidental spillage.
Any spilled ethanol must be immediately removed with an absorbent tissue and
cleaned with water to prevent ignition outside the burner reservoir.
Fuel must be kept in safe distance (min. 1 meter / 40 inches) from the fireplace. Do
not place fuel in front of the fireplace.
Step 2: Use a long match or a long lighter to ignite. When igniting, keep a safe distance
at arm’s length. Do not stand directly over the burner.
CAUTION: Fuel will burn low at first. Please allow 10-15 minutes to reach the optimal
temperature and flame height.
Opening or closing the sliding cover on the burner can adjust the flame.
Avoid drafts for long burning time.
Always maintain a safe distance of at least 1 meter (40 inches) from the fireplace
when the flame is lit.
IGNIS