20
WALKING BELT CENTERING
The walking belt may occasionally need to be centered. First be certain that belt is tensioned
properly. Start the treadmill and run it at about 4km/h, place the allen key through the hole in
the rear end cap and into the socket of the adjustment screw.
1. If belt has moved to the right:
Turn the right adjustment screw 1/4 turn clockwise, continue adjusting at 1/4 of a turn until
belt returns to the center.
2. If belt has moved to the left:
Turn the left adjustment screw 1/4 turn clockwise, continue adjusting at 1/4 of a turn until belt
returns to the center.
Continue to run the treadmill around 3-5 minutes to ensure the belt has been centered and
you have not made over-adjustment.
BELT ADJUSTMENT
To Next Page
Loading...
