2) Select left button or right button to change time zone.
3) Hold right button more than 2 seconds to save and exit.
Note:
The setting will be automatically saved if no operation in 10 seconds.
9. UPLOAD FILES TO COMPUTER AND WEBSITE
1) Power off iGS20E.
2) Connect iGS20E to your computer via USB cable.
3) Select left button to enter connection mode, then battery icon lights up.
4) Computer will recognize iGS20E as a new disk, then copy the activity files in folder as
below :\iGPSPORT\Activities\***.fit to computer.
5) Login http://i.igpsport.com, select fit format files to upload.
Note:
1. iGS20E can store about 90 hours’ riding files, when memory is not enough, it will delete
the earliest file automatically. Please upload, backup and delete the files regularly.
2. The files can be upload to www.strava.com or other website which support fit format files.
10. FACTORY RESET
Steps:
1) Power off iGS20E.
2) Connect iGS20E to power adaptor by USB cable.
3) Hold left and right button at the same time more than 5 seconds until “FA” display on
the screen.
4) Disconnect iGS20E to power adaptor.
Note:
Factory reset will erase all data, please backup activity files before factory reset.
11. SPECIFICATIONS
To Next Page
Loading...
