iGuard iGuardStove - User Manual

To Next Page

User & Online Features Manual

Electric, Gas & Cooktop Stove Models

TABLE OF CONTENTS

Getting Started Page 1

Specifications Page 2

Basic Install Layout Page 3

Quick Install Page 3 & 4

Wireless Setup Page 4

Device Menu Options Page 5 & 6

Operating the iGuardStove – Electric & Gas Page 6 & 7

ONLINE FEATURES

Add your iGuardStove to your Online Account Page 8

Identification Page 8

Home Page Page 8

Audio Visual Reminders Page 8

Auto Shut Off Timer Page 9

Manual Timer Page 9

Child Lock Page 9

Late Night Lock Page 10

Caregiver Lock Page 10

Additional Features Page 10

Shut Off Odometer Page 10

Room Temperature Alerts Page 11

History Calendar View Page 11

History Daily View Page 12

Activity Monitors – Daytime & Nighttime Page 12 & 13

Contacts List Page 13

Commercial Account Add a Manager Page 14

Manager Permission Page 14

Manager Permission (cont.) Page 15

Refund Policy Page 15

Warranty Policy Page 16

Wiring Diagram for Cooktop Hardwired Model Page 16

What’s in the Box

1- Control Panel – White or Black

Plug in Power Box or Hardwired Power Box or Gas Valve & Power

Plug

1- Network Cable

2- Screws15” of Wire Channel

⚠

WARNING

The iGuardStove must ONLY be connected to a 125-250 VAC grounded 4 prong range wall

outlet.

⚠

CAUTION

Do not mount control panel:

• Directly above the heat source where hot air or steam will come in contact

• On or above a microwave or toaster oven

• Directly on or above the stove

⚠

INSTALLATION REQUIREMENT

No electrician is required to install the Plug-in device and only a Philips screwdriver is needed

to mount the Control Panel. The Hardwired requires an electrician.

Note:

A professional gas fitter or plumber is required to install the gas valve.

Operating Note:

Hidden Caregiver Lock - If you press and hold the middle button for 5 seconds the device will

completely lock you out from all use. To unlock lock it press and hold the the button for 5 seconds

again. You can use this to take control of the device so only you can activate the stove. Activate

this feature while no one is watching you, as you do not want them to figure out how to defeat this.

Menu Lock – You can LOCK access to the Menu. Contact us and we will email you instructions. We

didn’t want to put the code in this manual in case it gets discovered by curious eyes.

⚠

IMPORTANT

Read This Manual Before Installing

When properly cared for, your new iGuardStove has been designed to be safe and reliable.

Do not disassemble any of the components. There are no user serviceable parts inside.

Getting Started

Need help?

Do you have a question about the iGuard iGuardStove and is the answer not in the manual?

The iGuardStove is a safety device designed to prevent stove-related fires and enhance kitchen safety, particularly for electric, gas, and cooktop stove models. It integrates motion sensing, gas detection (for gas models), and smart control features to automatically shut off the stove when unattended or in hazardous conditions. The device consists of a Control Panel, which mounts under a kitchen cabinet, and a Power Box (or Gas Valve for gas models) that connects to the stove's power supply.

Function Description:

The iGuardStove monitors kitchen activity using a motion sensor. If no motion is detected within a set "Auto Shut Off Timer" period (defaulting to 5 minutes), it automatically shuts off the stove. For gas models, a gas sensor detects unburned gas and immediately shuts off the gas valve, sending text alerts if connected to the internet. The device also features an "Emergency Quick Shut Off" button for instant stove shutdown. It provides various locking mechanisms, including "Child Lock" (for electric stoves), "Late Night Lock" (to disable the stove during specified hours), and "Caregiver Lock" (to temporarily lock out stove use). Online features allow users to register their device, manage settings, view activity history, and receive alerts remotely via a web-based account.

Important Technical Specifications:

Control Panel:

Dimensions: 9-11/16"W x 2-1/4"H x 2-3/16"D
Wi-Fi: 2.4 GHZ ~ 2.5 GHZ
Wattage Draw: 5 Watts
Operating Temperature: Approx. -40F - 140F (-40C - 60C)
Warranty: 1 Year Standard

Electric Stove Models:

Plug-in Power Box:
- Dimensions: 5-3/4"W x 5-1/2"H x 2-1/2"D
- Voltages (Input & Output): 125/250 VAC 50 Amp
- Plug Ends: NEMA 14-50 Standard Power Box with 12" cord plug
Cooktop Hardwired Power Box:
- Voltages (Input & Output): 125/250 VAC 30 Amp
- Cooktop: Bare Wire Ends marked
Cables Included: 10' Cat5e Cable with RJ45 ends
Firmware: Updateable via Wi-Fi connection
Default Settings: 5 min. Auto Shut Off Timer & 4hr. Manual Timer
Certification: CSA C22.2 No. 205 & UL 2017 QAI File # E10997

Gas Stove Models:

Supply Voltage: 15v AC/DC, 1.2A max, 6' Cord
Gas Valve: 1/2" or 3/4" NPT (in and out)
Max Pressure: 2 PSI
Plugs: DC Wall adapter with 6' cord
Certification: Honeywell valve CSA and UL certified
Gas Pipe Size (Approx. Diameter): 1" (Order 3/4" Valve) or 3/4" (Order 1/2" Valve)
- 1/2" Valve: A: 4-7/16", B: 4-1/4", C: 2-7/8"
- 3/4" Valve: A: 5-1/2", B: 4-1/2", C: 3-1/2"

Usage Features:

Automatic Shut Off Timer: Customizable from 1 to 15 minutes. The stove automatically shuts off if no motion is detected within the set time.
Manual Timer: Allows for uninterrupted cooking for longer durations (up to 10 hours), bypassing the motion sensor. Can be disabled if not desired.
Motion Sensor: Detects movement in the kitchen area to control the countdown timer and automatically turn the stove back on (for electric models) or prompt for "Resume" (for gas models).
Gas Sensor (Gas Models Only): Detects unburned gas and triggers an immediate shut-off of the gas valve, sending alerts. Features Upper and Lower sensors for different gas types.
LED Strobe: Visual alert for the hearing impaired, indicating impending shut-off or alerts.
Audio Visual Reminders: Beeps and strobes can be set to warn users before the stove automatically shuts off.
Child Lock (Electric Models Only): Requires a button press on the Control Panel to energize the stove, preventing accidental activation by children.
Late Night Lock: Disables the stove during specified hours and days of the week.
Caregiver Lock: A hidden feature that completely locks out stove use by pressing and holding the middle button on the Control Panel for 5 seconds.
Bypass iGuardStove: Temporarily disables the device's control over the stove, allowing unlimited use. Can be hidden from the on-screen menu for added protection.
Menu Entry Mode: Access to settings via a sequence of button presses, with an option to lock the menu.
Set Phase Switch (Electric Models Only): Adjusts the device's phase setting (Phase A or Phase B) to ensure the stove clock remains on after shut-off.
Alert Settings: Configurable alerts for various events, including stove shut-off, gas detection, and temperature extremes.
Display Settings: Adjusts brightness and contrast of the LCD screen.
Online Account Management:
- Home Page: Provides an overview of stove status, last action, and quick access to History, Settings, and Alerts.
- Activity Monitors (Daytime & Nighttime): Tracks motion activity in the kitchen, sending alerts if no activity is detected during specified periods (Daytime) or recording activity during the night.
- History Calendar View: Displays a 12-month overview of stove events, categorized by color-coded icons (e.g., Stove Turned On, Shut Off, Temperature Alert).
- History Daily View: Detailed minute-by-minute list of events for a selected day, providing insights into stove usage and forgotten cooking incidents.
- Room Temperature Alerts: Monitors ambient kitchen temperature and sends alerts if it exceeds set high or low thresholds.
- Shut Off Odometer: Records the number of times the iGuardStove has automatically shut off the stove, indicating potential fire preventions.
- Contacts List: Manages who receives alerts (text/email) for various events (Emergency Button Pressed, Loss of Communication, Auto Shut Offs, Turn On Alerts, Temperature Alerts, Activity Monitor).
- Managers & Primary Caregivers Permissions: Allows account owners to grant different levels of access to other users (Managers have full view/settings access, Primary Caregivers have view-only access).

Maintenance Features:

Firmware Updates: The device's firmware is updateable via a Wi-Fi connection, ensuring it stays current with the latest features and improvements.
Restore Factory Defaults: Resets all Internet settings and device configurations to their original factory settings.
Warranty Policy: 1-year standard warranty covering defects in materials and workmanship. Repairs or replacements are provided at no charge, excluding shipping costs.
Refund & Return Policy: Accepts returns for defective items or unopened products within 30 days of purchase with proof of purchase. RMA# required for returns.

iGuard iGuardStove Specifications

General

Brand	iGuard
Model	iGuardStove
Category	Stove
Language	English