40
Index
Exa & Exa 1 Page
A. Disassembly of Exa camera. 2
1. Take off the back 350.02. 2
2. Left side open. 2
3. Right side open. 2
4. Mechanism removal. 2
AA. Disassembly of EXA 1/63 camera. 3
1. Remove the back 370.20. 3
2. Removal of top-plate 350.21 U1. 3
3. Mechanism removal. 3
B. EXA assembly. 3
1. Mechanism insertion. 3
2. Close left side. 3
3. Close right side. 4
4. Check and adjust the distance between the lens mount and the film plane. 4
5. Check and adjust the mirror position. 4
BB. Assembly of camera EXA I/63. 5
1. Mechanism insertion. 5
2. Top-plate 350.21 U 1 fitting. 5
3. Check and adjust the distance between the lens mount and the film plane. See Exa 4
4. Check and adjust the mirror position. See Exa 4
C. Elimination of certain faults. 5
1. Shutter flap 350.04 U 5 falls back. 5
2. Shutter does not engage (Shutter flap 350.04 U 5 runs closed) 6
3. Mirror 300.21-53 replacement. 8
4. Frame-counter failure. EXA 8
5. Synchronisation failure. Adjusting the flash synchronisation. EXA 9
Adjusting the flash synchronisation. EXA I/63 9
Adjusting the insulating-part I. 10
Adjusting the insulating-part II. 10
Checking the X-contact. 11
6. Checking the film transport. 11
Exa 1a
A. Disassembly of camera 14
1. Take off the back cover 370.20. 14
2. Remove the top-plate 750-001.00. 14
3. Mechanism removal. See Exa I 3
B. Assembly of camera. 15
1. Mechanism insertion. See Exa I 5
To Next Page
Loading...
