Playing Audio Via Bluetooth
Once the iBT91 is paired to a device, it will attempt to autolink when the unit is turned on
and the device is within range (about 33 feet). If there is no audio signal for 15 minutes
(Bluetooth or Aux), the unit will power o to save battery life (except in color change
and lantern modes).
1. Press and hold the Power Button for 2 seconds to turn on the unit. The status
indicator will glow solid blue when a linked device is in range and detected. You can
then listen to audio streamed wirelessly from your paired Bluetooth device.
2. Control audio from your device. When Bluetooth audio is active, the status indicator
will glow solid blue.
3. Press t
he – or + Button to adjust
the iBT91 volume. A tone will sound when maximum
volume is reached. You can also adjust volume on your device.
4. When done listening,
press the Power Button
to turn the unit OFF.
Speakerphone Operation
NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call.
1. When a call is received, playing music is muted to hear the ring tone. Press
thexxxxBluetooth/Talk/End/Play/Pause Button to answer the call. For call waiting
function, use phone controls on your device.
2. When a call is completed, press the Bluetooth/Talk/End/Play/Pause Button to
end the call and resume previous function.
Using the iBT91
8
To Next Page
Loading...
