iHome iX360 - Using Bluetooth: Pairing Your Device Using NFC

8
P9
Using Bluetooth:
Pairing Your Device Using NFC
This unit features wireless NFC pairing, which allows NFC - enabled devices to pair and play instantly.
(For pairing non
- NFC devices, please see the following section “Pairing Your Device Manually”.)
The first time the unit is powered on, it will enter auto-pairing mode. Follow steps below to pair.
1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability as described in
the device’s user manual.
2. Press and hold the Power Button to turn the unit ON.
3. Touch the area of your playing NFC device against the NFC antenna area on the back left of the
unit. A tone will sound and the Multi-function Button will flash quickly while the unit attempts to pair.
4. “iHome iX360” should appear on your device’s menu. If your device asks if you wish to pair, accept
(select “Yes” or similar).
Once paired with a device, the Multi-function Button will glow solid,
confirmation tones will sound and your music will play through the unit.
Powering off the unit will disconnect the NFC Bluetooth device. To disconnect your device without
powering the unit off, simply touch it again on the antenna area on top of the unit.
Using the iX360