IHP WINSLOW PS40 - User Manual

Details on PFI approved, premium grade, low ash and chloride content pellets for optimal stove performance.

Lists fuel types to avoid, such as moisture damaged, oversized, wheat, barley, and bark pellets, which can harm the stove.

Step-by-step guide to starting the stove, including filling the hopper, closing the lid, and setting the control dial.

Procedure for adding pellets during operation and how to re-ignite if the flame extinguishes.

Instructions on how to turn off the stove by setting the control dial to the 'OFF' position.

Describes a clean, efficient burn with a sharp, active flame and bright yellow hue.

Details signs of poor combustion like lazy flames, soot, and build-up, indicating maintenance needs.

Explains how opening the damper increases combustion air, improving flame activity and color.

Describes closing the damper to reduce combustion air, useful for stoves burning too fast.

Check burn pot for clinkers and blockages before ignition; clear any non-combustible material.

The ash drawer collects ash and embers; refer to manual for proper disposal procedures.

Keep heat exchanger tubes clean by pulling the scraper rod to remove ash build-up for maximum efficiency.

Annual tasks include cleaning switches, ports, passages, blowers, and checking seals.