Plug in for NBN
™
Wireless
1. Using the power cable supplied, connect your
3. If you wish to use your VoIP phone service,
modem’s Power port to a power outlet. Press the
connect a phone handset to your modem’s
Power button on the back of the modem to turn
Phone1 port.
it on.
4. You can use an additional Ethernet cable to
2. Use the supplied Ethernet cable to connect your
connect your computer to any of your modem’s 4
modem’s red WAN port to the UNI-D 1 port on
LAN ports. Alternatively, follow the steps later in
your NBN™ Connection Box. If UNI-D1 doesn’t
this guide to connect devices via WiFi.
work, try each UNI-D port before contacting us
Turn to Page 14 to continue setup.
for a hand.
P OWER
Ethernet Cable
Plug into your computer’s
Ethernet Port (Optional)
Phone Cable
Plug into handset
(Optional)
Power Cables
Plug into power outlets
NBN™ Connection Box
Connects to your modem via
Ethernet to the WAN Port
123 4
11
To Next Page
Loading...
