iiNet TG789 - Setting up VoIP: Manual Configuration; Configuring SIP Domain and Registrar; Entering Phone Number and SIP Credentials

Setting up VoIP
1. On your connected computer or WiFi device, log in at
http://10.1.1.1. The default username and password
can be found under “GUI Login” on your modem’s
barcode sticker.
2. Click Telephony on the dashboard. On the Global page,
underneath SIP Network, click the Edit button to
the right of the existing SIP Network entry. Enter the
following settings:
SIP Domain:
iinetphone.iinet.net.au
or
sip.westnet.com.au
Primary Registrar:
sip.STATE*.iinet.net.au
or
sip.STATE*.westnet.com.au
Primary RegistrarPort: 5060
Primary Proxy:
sip.STATE*.iinet.net.au
or
sip.STATE*.westnet.com.au
Primary ProxyPort: 5060
Expire time: 3600
*Replace “STATE” with your state or territory, i.e. ACT, NSW, NT, QLD, SA, TAS, VIC, or WA
3. Select the Phone Numbers tab and then click Create
New, entering the following settings:
Username: Your VoIP number
(no spaces or brackets)
URI: Your VoIP number
(no spaces or brackets)
Password: Your VoIP password
(case sensitive)
Display Name: Your VoIP number
(no spaces or brackets)
SIP Network: SIP Network
Port: FXS
4. Click the Apply button to the right to save your
settings. If successful, Registered will show a green
icon.
5. Try making a test call on a handset plugged into your
modem’s green Phone 1 port.
21