Iiyama ProLite E1900S - MANUAL SCREEN ADJUSTMENT STEPS; Vertical and Horizontal Image Tuning

ENGLISH
1
FF
FF
F
1) Adjust the H.Position so that the left side of the picture frame will move to the left
edge of the display area.
NOTE  When the left side of the picture frame moves apart from the left edge of the display
area during the H.Size adjustment, adjust steps 1) and 2).
 Another way to make the H.Size adjustment is to correct the vertical wavy lines in the
zebra pattern.
 The picture may flicker during the H.Size, H.Position and V.Position adjustment.
 In case the picture frame is bigger or smaller than the data display area after the
H.Size adjustment, repeat steps from
C
.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the H.Size.
CC
CC
C
Press the Auto Button. (Auto Adjust)
DD
DD
D
Adjust the image manually by following procedure below when the screen has a
flicker or blur, or the picture does not fit in the display area after performing the Auto
Adjust.
EE
EE
E
Adjust the V.Position so that the top and bottom of the picture frame will fit to the
display area.
NOTE
14 OPERATING THE MONITOR