ENGLISH
26 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Language
Setting
English
Deutsch
English
German
Français French
Russian
Polski Polish
SpanishEspañol
Language
English
Schedule
Power Save
Low
Set Monitor ID 1
HDMI Control
Off
Information
Advanced
Setting
:Move
:Enter
:Exit
ENTER
EXIT
Control Setting
Network Settings
All Reset
RS-232C
Schedule
Power Save
Low
High
Off
Power Save is turned off.
Dutch Nederlands
Date and Time
Displays the current date and time.
Year/Month/Day/Hour/Minute/Daylight Saving Time
Date set/Time set
Input
Sets when to turn on or off the display.
On/Off/Everyday/Mon/Tue/Wed/Thu/Fri/Sat/Sun
All input sources can activate entering the
power saving mode, but only the VGA signal
can deactivate it. If an another input source is
connected you have to press the POWER button.
All input sources can activate/deactivate
entering the power saving mode.
Clock Display
On
Off
Display time.
Clock Display is turned off.
Select default input source to use when the
display is automatically turned on next time.
Default/AV/S-Video/YPbPr/VGA/DVI/HDMI/
DisplayPort
On/Off Timer
Control Setting
RS-232C
LAN
IR Passthrough
Select this option if multiple displays are
connected via RS-232C cables.
Primary/Secondary
Select the RS-232C to control the display.
Select this option to control the display via LAN.
Network Settings
Cancel
Execute
Return to Menu.
If you are in a DHCP environment,
once established, the IP Address,
Subnet mask, Default gateway,
Primary and Secondary DNS settings
are displayed.
DHCP
Manual
If you are not in a DHCP environment, contact
your ITS administrator for information on the
IP Address, Subnet mask, Default gateway,
Primary and Secondary DNS settings and enter
them accordingly.
To Next Page
Loading...
Need help?
General