Need help?Do you have a question about the IK Multimedia iRig Acoustic Stage and is the answer not in the manual?
General| Microphone Type | Condenser |
|---|---|
| Compatibility | iOS, Android, Mac, PC |
| Frequency Response | 20Hz - 20kHz |
| Polar Pattern | Cardioid |
| Included Accessories | Mounting clip, windscreen, USB cable |
| Preamp | Built-in |
| Feedback Cancellation | Yes |
| Signal-to-Noise Ratio | 80 dB |
| Power Supply | Battery |
| Maximum SPL | 130dB |
Lists the items included in the iRig Acoustic Stage package.
Benefits and process for registering the product for support and updates.
Instructions for inserting batteries into the device.
How to attach the iRig Acoustic microphone to your instrument.
Steps to connect the iRig Acoustic Stage output to PA mixers or guitar amplifiers.
How to connect and mix with an onboard piezo pickup system.
How to balance the tone between microphone and piezo signals.
Using the phase switch to optimize sound when mixing signals.
How to use the volume knob for output adjustment and muting.
Instructions on using the belt clip to attach the device to a belt or strap.
Connecting the iRig Acoustic Stage to a computer for digital recording.
How to use the Cancel Feedback button to eliminate unwanted feedback frequencies.
Selecting and understanding the different tone presets (Natural, Warm, Bright, Nylon).
Guide to calibrate the system for your specific instrument's response.
Explanation of the phase flip switch for signal phase adjustment.
Mixing guitar pickup output with the iRig Acoustic microphone tone.
How to interpret LED indicators for low battery levels and audio muting.
Detailed technical specifications of the iRig Acoustic Stage.
Instructions on how to access the full warranty policy online.
Links to support pages and product information websites.
To Next Page