Need help?Do you have a question about the IKA C-MAG HS 7 control and is the answer not in the manual?
General| Type | Magnetic Stirrer with Heating |
|---|---|
| Stirring Speed | 100 - 1500 rpm |
| Control Type | Digital |
| Display | LED |
| Weight | 5.2 kg |
| Stirring quantity max. per stirring position (H2O) | 10 l |
| Set-up plate material | Ceramic |
| Permissible ambient temperature | 5 - 40 °C |
| Permissible relative humidity | 80 % |
| Protection class according to DIN EN 60529 | IP 21 |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Power Supply | AC |
| Speed Range | 100 - 1500 rpm |
| Stirring Capacity (H2O) | 10 l |
| Viscosity max. | 1000 mPas |
| Power Consumption | 300 W |
Information displayed by the device's screen.
Explanation of various warning symbols used on the device.
Important general safety guidelines and precautions for device operation.
Guidelines and precautions related to the physical design and placement of the device.
Specifies acceptable media, contaminants, and potential side reactions.
Safety procedures to follow during the operation of sample runs.
Safety considerations when using accessories with the device.
Safety instructions for connecting power and safely switching off the device.
Measures to protect the device from damage and overheating.
Fundamental information and guidelines for proper device usage.
Lists all items included in the product package.
Step-by-step instructions for assembling the support rod.
Guide on how to operate the device, including basic functions.
Procedure for testing the safety circuit's switch-off function.
Instructions for configuring and adjusting temperature control settings.
Overview of the device's menu system and its hierarchy.
Description of different operating modes (A, B, D).
Explanation of temperature control modes (PID, 2P).
Settings for intermittent mode and rotation direction control.
Configuration options for audible alerts.
Information and troubleshooting for Error 5.
Handling of events when the timer expires.
Settings related to safety and viscosity measurement modes.
Procedure to reset device settings to factory defaults.
Steps for calibrating external temperature probes.
Information about the current software version of the device.
Information on connecting and communicating with the device via interfaces.
Details on USB and RS 232 connectivity for computer operation.
Guidelines for handling and maintaining the device.
A general overview of available accessories for the device.
Guide to identifying and resolving error codes displayed by the device.
Information on Watchdog errors (Err. 1, Err. 2) and their solutions.
Troubleshooting for temperature and sensor-related errors (Err. 3, 5, 6, 13, 14, 21, 22, 24, 44).
Troubleshooting for errors related to motor control and heating elements (Err. 4, 25, 26, 31, 46).
Information regarding warranty terms and conditions.
Detailed technical specifications of the C-MAG HS 7 control device.
To Next Page
