To Next PageTo Next Page
Need help?Do you have a question about the IKA RV 10 control Series and is the answer not in the manual?
General| Type | Rotary Evaporator |
|---|---|
| Motor principle | Brushless DC motor |
| Speed range | 20 - 280 rpm |
| Heating bath volume | 5 L |
| Permissible ambient temperature | 5 - 40 °C |
| Permissible relative humidity | 80 % |
| Protection class according to DIN EN 60529 | IP 20 |
| Frequency | 50/60 Hz |
| Heating bath temperature range | Room temp. + 5 - 180 °C |
| Temperature control accuracy heating bath | ± 1 °C |
| Vacuum control | Integrated |
| Voltage | 220 - 240 V |
Explains the meaning and significance of various warning symbols used in the manual.
Essential safety advice and personal protective measures for the user.
Outlines the recommended applications and suitability of the device for various laboratory tasks.
Specifies the appropriate environments and conditions for operating the device.
Lists all components and accessories included with the device upon delivery.
Explains the vacuum control functionality for the RV 10 control model.
Details the speed-vacuum control feature for the RV 10 auto model.
Instructions for installing and preparing the RV 10 auto drive unit.
Guidance on adjusting the base of the device for stability and proper positioning.
Steps for correctly installing the condenser seal for proper glassware assembly.
Detailed instructions for assembling the locking device for the vertical glassware.
Steps for installing the washer component during glassware assembly.
Instructions on how to safely detach the condenser unit.
Specific instructions for connecting the hose system for the RV 10 control model.
Specific instructions for connecting the hose system for the RV 10 auto model.
Overview of the initial display screen and its components upon device startup.
Interpretation of various icons and symbols displayed on the device's working screen.
Controls for individual valves within the service menu for diagnostic purposes.
Manual start/stop function for the vacuum pump for service checks.
Setting temperature to zero for specific service operations.
Option to select the user interface language.
Selection of units for displaying pressure and quantity measurements.
Customization of screen appearance and firmware update info.
Adjustment of volume and key tone activation/deactivation.
Resets menu values, programs, and system settings to default values.
Configuration for device identification, Bluetooth, and Labworldsoft connectivity.
Provides an overview of important system settings.
Explains different operating modes like Automatic, Manual, Pump %, Volume, and Program.
Instructions and settings for performing a cleaning cycle on the device.
Configuration of operational limits for vacuum and pump speed.
Setting the vacuum hysteresis for precise vacuum control.
Management and selection of solvents with their associated parameters for distillation.
Configuration for alternating rotation direction at set intervals.
Setting the minimum and maximum speed limits for the rotation drive.
Setting up the timer for measurement duration and alerts.
Option to show timer status on the main display screen.
Creation and management of up to 10 user-defined pressure-rotation-time profiles.
Options to save the last distillation sequence as a program.
Explanation of how to edit, insert, or delete segments within a program.
Setting a password to secure menu settings from unauthorized changes.
Option to resume measurement automatically after a power interruption.
Manual control of connected valves for service and diagnostic checks.
Manual start/stop function for the vacuum pump for service purposes.
Setting temperature to zero for specific service operations.
Option to select the user interface language.
Selection of units for displaying pressure and quantity measurements.
Customization of screen appearance and firmware update info.
Adjustment of volume and key tone activation/deactivation.
Resets menu values, programs, and system settings to default values.
Configuration for device identification, Bluetooth, and Labworldsoft connectivity.
Provides an overview of important system settings.
Configuration and command set for RS 232 serial communication.
Details on connecting and using the USB interface for remote operation and firmware updates.
Procedures and recommended agents for cleaning the device.
Information on how to order replacement parts for the device.
