Need help?Do you have a question about the IKA EUROSTAR 60 DIGITAL and is the answer not in the manual?
General| Max Torque | 60 Nm |
|---|---|
| Viscosity max. | 50000 mPas |
| Torque max. at stirring shaft | 60 Nm |
| Permissible ambient temperature | 5 - 40 °C |
| Permissible relative humidity | 80 % |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Torque | 60 Nm |
| Material | Plastic and metal |
| Display | Digital display |
Vital information for safeguarding health and safety.
Information for correct technical functioning.
Reading instructions, trained staff, safe setup, electrical safety.
Handling hazardous substances, atmospheres, and environmental conditions.
Securing the instrument, stand, and stirrer; speed management and imbalance.
Safe operation of rotating shafts and use of personal protective equipment.
Risks from materials, speed, and general operational precautions.
Processor-controlled speed regulation for constant speed regardless of viscosity.
Explanation of error codes (Er 2, Er 3, Er 4, Er 8, Er 21) and their solutions.
To Next Page
