Instructions
For more instructions and explanation videos, please visit
www.ikamper.com/instructions
MOUNTING THE SKYCAMP ON YOUR VEHICLE
WARNING!
• If you have any back, knee or any other health complications, do
NOT attempt to mount the Skycamp on your vehicle.
• Your vehicle MUST have a roof rack or cross bars installed in order
to mount the Skycamp.
• The cross bars MUST have a dynamic weight load of at least
165lbs (75kgs) and MUST be at least 30” (76cm) apart.
• If you are unsure of the mounting process or have any questions,
contact an iKamper representative at support@ikamper.com.
It is easiest to mount the Skycamp from the side of your vehicle,
rather than the front or back.
1. Have two people stand at the front of the Skycamp, and two people
at the back.
2. Grab the panel on the bottom of the Skycamp and lift up to your
waist.
3. Lift the Skycamp up to your shoulders, and then above your head.
4. Gently slide the Skycamp onto your cross bars.
5. Make sure the Skycamp is centered.
1
To Next Page
