To Next Page
A
Ann SanchezJul 31, 2025
What to do if Wi-Fi connection timed out on Ikan IKW1 Receiver?
- RrubeneatonAug 1, 2025
If the Ikan Receiver's Wi-Fi connection timed out, try turning the receiver's power off and then on again.
What to do if Wi-Fi connection timed out on Ikan IKW1 Receiver?
If the Ikan Receiver's Wi-Fi connection timed out, try turning the receiver's power off and then on again.
Why does the Ikan Receiver power off when using battery?
If the power turned off while using the Ikan Receiver with a battery, try using a fully charged battery. Note that frequent power offs can occur when the battery does not have enough charge.
How to improve Ikan IKW1 signal in short distance?
If the signal is not good even in short distance on your Ikan Receiver, check the antenna connections to the device. Also, on the Receiver's OSD menu, check if the system settings/signal strength is sufficient.
What to do if the Ikan Receiver screen freezes when signal cable removed from transmitter?
This is normal behavior. When the signal cable is removed from the transmitter, the Ikan Receiver screen will show the last picture displayed before disconnection. To continue motion pictures, connect the signal cable to the transmitter.
Key safety guidelines for operating the wireless system, including power and handling.
Lists the key capabilities and specifications of the IKW1 Wireless Transmitter/Receiver System.
Details the V-Plate Adapter, V-Mount Adapter, Internal Power Port, and Mini USB Port.
Details ports like SDI Out, SDI Input, HDMI Input, Power, and USB on the transmitter side.
Details controls and LEDs like Pairing Button, Link LED, and Tally LED on the transmitter.
Details ports and indicators like SDI Out, HDMI Out, Power, and USB on the receiver side.
Details receiver controls, LEDs, and the RJ-45 GPI port pin assignment.
Step-by-step instructions for pairing the transmitter and receiver units using the OSD menu.
Guidance on setting up external input modes and managing receiver connections via OSD.
Procedure for updating firmware on both transmitter and receiver units via USB.
Detailed technical specifications for the IKW1 transmitter unit.
Detailed technical specifications for the IKW1 receiver unit.
Lists compatible SDI and HDMI signal formats supported by the system.
Provides physical dimensions and a diagram of the unit without the battery plate.
Diagram and dimensions for the V-Mount version of the unit.
Diagram and dimensions for the Anton Bauer adapter version of the unit.
Illustrates V-Mount, DV Battery Mount, and Dual DV Battery Mount adapters.
Shows images of different antenna accessory kits used with the system.
Provides solutions for common problems like power issues, connection failures, and signal loss.
Details the product warranty period, terms, and contact information for support.
States that product design and specifications may change for improvement purposes.
General