COMCO IKARUS
Maintenance Manual C42 Series
MaintenanceManual C42-
Series_Issue_VII_18.02.2014.doc
Revison No.:1 53 from 107
Left wing:
1. Check that the wing spar connections are secure
2. Check that wing struts are properly connected and secure.
3. Check that auxiliary struts with quick-release fasteners are secure
4. Check that airspeed indicator pick-up is secure, free from dirt and water and
pulled out
5. Check the aileron bell cranks and push-rods. To do this, open the zips on the
underside of the wings
6. Check condition of covering (cracks, etc.)
7. Check that the profile struts are secure
8. Check wing tip and wing tubes for deformation
9. Check aileron and wing flap attachment and connections
Left fuselage:
1. Check condition of glass-fibre fuselage shell (cracks, holes, etc.)
2. Check that glass-fibre fuselage shell is secure (check for missing screws at
the upper-/underside slice
)
3. Check elevator bellcrank through inspection hole on the side of the fuselage
(baggage bin)
Empennage:
1. Check connections of the horizontal tail fins
2. Check control surface hinges (safety devices)
3. Check elevator inter-connection
4. Check trim tab attachment and connections
5. Check elevator push-rod connection
6. Check attachment of horizontal tail struts for deformation
7. Check rudder cable connections and safety devices
8. Check covering for cracks and chafing
Right fuselage:
1. Check condition of glass-fibre fuselage shell (cracks, holes, etc.).
2. Check that glass-fibre fuselage shell is secure (check for missing screws at
the upper-/underside splice
)
3. Check that the tank filler cap is tightly closed
Upper fuselage :
1. Check that the antenna is secure
Right wing:
Cf. left wing
To Next Page
Loading...
Need help?
General
