COMBINATION DISPLAY
Integrated A/M transmission gear
display
The gears of AT will be displayed in the
Area A of the combination display: P, R,
N, D and M.
The A/T operating mode is displayed
above the gear display:
Mode display:
Gear display:
Display at M gear:
At M gear, the transmission is shifted to
the manual mode with the gears able
to be switched from 1
st
to 4
th
gears, as
shown below.
Note:
If the gear display indicator lamp
on the combination display stably
indicates a value or letter, the vehicle
is at this gear or running at this gear.If
the gear display on the combination
display demonstrates symbol “-”
with the “
” and “ ” indicator
lamp ashing and the audible signal
sounded, the automatic transmission
may operate abnormally.
In this case, please contact the
Dongfeng Franchise Store or IKCO
authorized representatives.