What to do if IKEA Hob displays 'F'?
If 'F' lights up on the power setting display of your IKEA Hob, it indicates that you're using unsuitable cookware, there's no cookware on the cooking zone, or the cookware's bottom diameter is too small. Try using suitable cookware, placing cookware on the cooking zone, or moving to a smaller cooking zone.
What does the symbol plus a number mean on my IKEA Hob display?
If you see a symbol plus a number on your IKEA Hob's power setting display, it indicates an electronic component error. To resolve this, disconnect the hob from the electrical supply for a few minutes. Remove the fuse, wait one minute, and then reinsert it.
What to do if IKEA Hob displays overheating symbol?
If your IKEA Hob displays the overheating symbol, it means the overheating protection for the cooking zone has been activated. Deactivate the appliance, remove the hot cookware, and wait approximately 30 seconds before reactivating the cooking zone. The symbol should disappear, though the residual heat indicator might remain. Cool down the cookware and check it with the section 'Cookware for the induction cooking zones'.
Why does my IKEA Hob beep and turn off?
Your IKEA Hob beeps and deactivates because one or more symbols have been covered for longer than 10 seconds. Uncover the symbols to resolve this.
Safety guidelines for children and vulnerable individuals.
Guidelines for safe electrical connections.
How to turn the appliance on and off.
Steps to adjust cooking heat levels.
Explanation of the booster function.
Guide to setting and using the timer.
Common issues and how to resolve them.
To Next Page
General
