Need help?Do you have a question about the IKEA ALEX and is the answer not in the manual?
General| Brand | IKEA |
|---|---|
| Model | ALEX |
| Category | LCD Drawer |
| Language | English |
Connect base panels using screws and cam locks.
Insert wooden dowels into the side panel and attach it to the base.
Attach the back support rails to the side panels using screws.
Screw the top panel onto the assembled frame structure.
Insert wooden dowels into the side panels for drawer runners.
Secure drawer runner components to the side panels using cam locks.
Insert wooden dowels into the side panels for the back support.
Screw the main frame together using the provided bolts and Allen key.
Screw the plastic feet into the base of the unit.
Assemble the drawer boxes by connecting sides, front, and back panels.
Attach connecting screws to the drawer fronts.
Connect drawer runner components to the drawer fronts using cam locks.
Slide the back panel into the grooves of the assembled frame.
Nail the drawer box base to the assembled drawer frame.
Attach drawer fronts to the assembled drawer boxes using screws.
Attach connecting screws to the side frames for drawer installation.
Secure drawer runner components to the side frames using cam locks.
Slide the assembled drawer unit into the main frame.
Screw the top surface onto the assembled drawer unit frame.
Slide the assembled drawers into their respective runners.
Place the top cover and secure with plastic caps. Includes safety warning.
To Next Page