5
The sensor has silicon feet to prevent it from moving
around so there is no need to use double-sided tape or
any other adhesive that may obstruct the ow of water.
Testing the alarm
We recommend testing the alarm to familiarize yourself
with the way it sounds. Place the sensor in a bowl of
water to test the alarm.
The alarm will stop when the prongs underneath the
sensor dry out.
Adding more sensors
You can connect as many sensors as you like to the
DIRIGERA hub and IKEA Home smart app.
To add a new sensor follow the instructions in the IKEA
Home smart app.
Battery care
When it’s time to replace the battery, a red LED
indicator will light up three times on the sensor and in
the IKEA Home smart app you will be notied when the
battery is low.
Changing the battery
Open the back of the sensor, insert a new AAA/HR03
battery and close it again.
Please note the safety information in this document
concerning battery usage and disposal.
We recommend using 1 x IKEA LADDA 750
(AAA/HR03, 1.2V, 750mAh, Ni-MH). Sold separately.
To Next Page
Loading...
