IKEA BERGSHULT - User Manual

70-80 cm
≥100 cm
A
B
BERGSHULT
ENGLISH
To give the shelf maximum support, it's
important that you place the brackets in the
right position. Place the brackets according
to one of the following options:
─ Use 2 brackets underneath the shelf.
Place them 70-80 cm from each other
according illustration A.
─ Use 3 brackets underneath the shelf.
Place one on each side and one in the
middle according to illustration B.
中文
为了最大限度给搁板提供支撑，您必须将托架安装
在合适的位置。根据以下方式安装托架：
─ 在搁板下安装2个托架。如图A，2个托架之间
保持70-80cm的距离。
─ 在搁板下安装3个托架。如图B，2个托架装在
两侧，1个托架安装在中间。
繁中
為增加層板的支撐度，須將支撐架安裝在適當位置。
請依下列說明安裝支撐架:
─ 層板下方安裝2個支撐架，請依圖示A安裝，2
個支撐架之間的距離應為70-80公分。
─ 層板下方安裝3個支撐架，請依圖示B安裝，先
在層板兩側各安裝一個支撐架，再將另一個支
撐架安裝在中間。

IKEA BERGSHULT Specifications

General

Depth	20 cm
Material	Particleboard, Paper foil, Plastic edging
Color	White
Length	60 cm
Thickness	2.5 cm
Max Load	10 kg

Summary

Shelf Bracket Installation

Two Bracket Method

Attach two brackets under the shelf, spaced 70-80 cm apart, following illustration A.

Three Bracket Method

Attach three brackets under the shelf, one on each side and one in the middle, following illustration B.