Need help?Do you have a question about the IKEA FIXA and is the answer not in the manual?
General| Battery Type | Lithium-Ion |
|---|---|
| Battery Voltage | 3.6 V |
| No-load Speed | 200 RPM |
| Type | Cordless |
| Chuck Type | Hex |
| Features | LED light |
| Included Accessories | Charger, screwdriver bits |
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not force the power tool. Use the correct power tool for your application.
Recharge only with the charger specified by the manufacturer.
Have your power tool serviced by a qualified repair person using only identical replacement parts.
Wear ear protectors when using the hammer drill. Exposure to noise can cause hearing loss.
Keep the battery charger away from rain or moisture. Penetration of water increases risk of electric shock.
The vibration emission level stated in this manual has been measured in accordance with a standardised test.
Prepare the tool by setting the direction switch and fully recharging the battery before use.
Learn to change SDS plus tools and handle accessories safely, as they may be hot.
Select operating modes, reverse rotation direction, and understand On/Off and speed control.
Ensure good ventilation and consider dust extraction for health and safety.
Keep the machine clean, follow usage advice, and understand overload protection.
Information on environmentally sound disposal of electrical and electronic equipment.
Do not dispose of batteries in household waste; take them to designated collection points.
Information for users in countries outside the EU regarding product disposal.
To Next Page
