parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
these devices can reduce dust related
hazards.
Power tool use and care
a. Do not force the power tool. Use
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
b. Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power
sourceand/orthebatterypackbefore
making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce
the risk of starting the power tool
accidentally.
d. Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power tool
or these instructions to operate the
power tool. Power tools are dangerous in
the hands of untrained users.
e. Maintain power tools. Check for
misalignmentorbindingofmoving
parts,breakageofpartsandanyother
condition that may affect the power
tools operation. If damaged, have the
powertoolrepairedbeforeuse.Many
accidents are caused by poorly maintained
power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g. Use the power tool, accessories
andtoolbits,etc.inaccordancewith
these instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to
beperformed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
h)Holdthepowertoolbyinsulated
gripping surfaces, when performing
an operation where the fastener may
contact with hidden wiring or its
own cord. Fasteners contacting a “live”
wire may make exposed metal parts of
the power tool “live” and could give the
operator an electric shock.
Battery tool use and care
a. Recharge only with the charger
speciedbythemanufacturer. A
charger that is suitable for one type of
battery pack may create a risk of re when
used with another battery pack.
b. Use power tools only with
specicallydesignatedbatterypacks.
Use of any other battery packs may create
a risk of injury and re.
c. Whenbatterypackisnotinuse,
keepitawayfromothermetalobjects,
like paperclips, coins, keys, nails,
screwsorothersmallmetalobjects
that can make a connection from one
terminal to another. Shorting the battery
6