EasyManuals Logo

IKEA FIXA Instructions

IKEA FIXA
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Protect the power tool against heat,
e. g., against continuous intense
sunlight, re, water, and moisture.
Danger of explosion.
In case of damage and improper
use of the battery, vapours may
be emitted. Provide for fresh air
and seek medical help in case of
complaints. The vapours can irritate the
respiratory system.
Safety Warnings for battery chargers
For indoor use only.
Double insulated.
Keep the battery charger away from
rain or moisture. Penetration of water in
the battery charger increases the risk of
an electric shock.
Do not charge other batteries. The
battery charger is suitable only for
charging the batteries that were supplied
with your power tool. Otherwise there is
danger of re and explosion.
Keep the battery charger clean.
Contamination can lead to danger of an
electric shock.
Before each use, check the battery
charger, cable and plug. If damage
is detected, do not use the battery
charger. Never open the battery
charger yourself. Have repairs
performed only by a qualied
technician. Damaged battery chargers,
cables and plugs increase the risk of an
electric shock.
Do not operate the battery charger
on easily inammable surfaces (e. g.,
paper, textiles, etc.) or surroundings.
The heating of the battery charger during
the charging process can pose a re
hazard.
Children should be supervised to
ensure that they do not play with the
battery charger.
Products sold in GB only: Your product is
tted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved
to BS 1362). If the plug is not suitable for
your socket outlets, it should be cut off
and an appropriate plug tted in its place
by an authorised customer service agent.
The replacement plug should have the
same fuse rating as the original plug. The
severed plug must be disposed of to avoid
a possible shock hazard and should never
be inserted into a mains socket elsewhere.
Products sold in AUS only: Use a residual
current device (RCD) with a rated residual
current of 30 mA or less.
VIBRATION INFORMATION
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 60745. It may be used to compare
one tool with another and as a preliminary
assessment of exposure to vibration
when using the tool for the applications
mentioned in this manual. However,
using the tool for different applications,
or with different or poorly maintained
accessories, may signicantly increase the
exposure level.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off or
8

Other manuals for IKEA FIXA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IKEA FIXA and is the answer not in the manual?

IKEA FIXA Specifications

General IconGeneral
Battery TypeLithium-Ion
Battery Voltage3.6 V
No-load Speed200 RPM
TypeCordless
Chuck TypeHex
FeaturesLED light
Included AccessoriesCharger, screwdriver bits

Related product manuals