Control panel
1
5
6
3
2
4
1
Display
2
Bottle Chill button
3
Temperature colder button
4
Temperature warmer button
5
Mode button
6
ON/OFF button
It is possible to change predefined sound of
buttons to a louder one by pressing togeth-
er Mode button and Temperature colder
button for some seconds. Change is reversi-
ble.
Display
ABCDE
F
G
•A. Alarm indicator
•B. Eco Mode
• C. Fast Freeze mode
• D. Temperature indicator
•E. Bar indicators
• F. Bottle Chill mode
•G. Demo mode
After selection of the Mode or the
Temperature button the animations
starts.
After selection of the temperature the ani-
mation flashes for a few minutes.
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the display
is off.
3. The alarm buzzer could operate after
few seconds.
To reset the alarm refer to "High tem-
perature alarm".
4. If DEMO appears on the display, the
appliance is in demonstration mode.
Refer to "Troubleshooting." paragraph.
(DEMO mode is a function for the re-
tailer to
show the functionality of the appliance.)
5. The temperature indicators show the
set default temperature.
ENGLISH 8
To Next Page
Loading...
