Control panel
1 2 3 4
1
ON/OFF switch
2
Display
3
Function button / Reset alarm
4
Temperature regulator
Display
1 2 3 4 5
1
Door open alarm indicator
2
Positive or negative temperature indi-
cator
3
Temperature indicator
4
Shopping function
5
Fan function
Switching on
After plugging the plug into the power out-
let, if the display is not illuminated, press
ON/OFF switch, appliance on.
As soon as the appliance is turned on, the
following signals will appear on the control
panel:
• Positive or negative temperature indica-
tor will be positive, indicating that the
temperature is positive.
Place the Temperature setting regulator in a
middle position, and the appliance will be
set up to provide the following temperature:
roughly +5°C in the refrigerator.
Functions Menu
Each time Function button is pressed, the
following functions are activated in a clock-
wise direction:
• Shopping function
•Fan function
• no symbol: normal operation.
Switching off
The appliance is shut off by pressing ON/
OFF switch for more than 1 second.
After this, a countdown of the temperature
from -3 -2 -1 will be shown.
When the appliance is switched off, Display
also goes off.
Temperature regulation
The temperature within the appliance is
controlled by the Temperature regulator sit-
uated at the top of the cabinet.
To operate the appliance, proceed as fol-
lows:
• turn the knob clockwise to obtain the
maximum coldness
• turn the knob counter- clockwise to ob-
tain the minimum coldness.
ENGLISH 8
To Next Page
Loading...
Need help?
General
