To Next Page
S
Susan ShortSep 2, 2025
Why does the power setting change between two levels on my IKEA HOGKLASSIG?
- EEbony MitchellSep 2, 2025
This occurs when the power exchange function is in operation. Refer to "Daily use" for more information.
Why does the power setting change between two levels on my IKEA HOGKLASSIG?
This occurs when the power exchange function is in operation. Refer to "Daily use" for more information.
What does it mean when my IKEA HOGKLASSIG Hob shows ?
If the IKEA Hob is displaying , try the following: * Ensure there is cookware on the zone. * Make sure you are using the correct cookware. * Verify the cookware's bottom diameter is appropriate for the zone. * Ensure the cookware fully covers the cooking zone. * If using Multi-Flexi mode, ensure the cookware covers the necessary sections or adjust the function mode. * If using Pre-Set Cooking mode, use only one pot.
What to do if comes on my IKEA HOGKLASSIG Hob and there is an error?
Disconnect the hob from the electrical supply for a short period. Also, disconnect the fuse from the house's electrical system and then reconnect it. If the error persists, contact an authorized installer.
What to do if my IKEA HOGKLASSIG shows ?
If your IKEA Hob displays , switch it off and then back on again. This should reset the Automatic Switch Off function.
Why isn't the residual heat indicator on my IKEA HOGKLASSIG working?
If the residual heat indicator on your IKEA Hob isn't turning on, it could be because the zone hasn't been hot long enough. If the zone was used long enough to be hot and the indicator still doesn't work, contact After Sales Service.
What to do if there is no signal when I touch a symbol on the IKEA HOGKLASSIG control panel?
If there is no signal when you touch a symbol on the IKEA hob control panel, the signals are deactivated. Activate the signals. Refer to 'Daily use' chapter.
Why isn't my IKEA Hob's flexible induction cooking area heating up the cookware?
The cookware may be incorrectly positioned on the flexible induction cooking area, or the diameter of the cookware's bottom may be unsuitable for the activated function or mode. Ensure the cookware is correctly placed according to the function or mode being used. For a single section, use cookware with a diameter smaller than 160 mm. Refer to "Flexible induction cooking area" for guidance.
Why is my IKEA Hob's residual heat indicator not working?
The zone might not be hot enough if it was only operated for a short time. If the zone was used long enough to be hot, contact After Sales Service.
What to do if my IKEA HOGKLASSIG Hob is beeping and switches off?
This can happen if something is placed on one or more symbols on the control panel. Remove the object from the symbols.
Why does my IKEA HOGKLASSIG keep switching off?
The hob may switch off if something is placed on the symbol. Make sure to remove any objects from the symbols.
Covers general safety, installation, and electrical connection guidelines.
Guidelines for operating the appliance safely and correctly.
General installation requirements and adherence to laws.
Details on connecting the appliance to the power supply.
Explanation of control panel buttons, symbols, and displays.
Resolving problems with switching on, operating, or appliance shutting off.
General