IKEA ICTD-KL-1 User Manual

User manual of Remote Control
1、 Model No.: ICTD-KL-1
2、Technical Parameter
a) WORKING VOLTAGE: 1.8~3.6 V(Normal：2X1.5VDC);
b) Transmit speed: 250KHz;
c) Frequency band: 2436.20 +/- 0.03 MHz
3、Application
This Remote Control can match with 10W, 20W and 30W dimmable LED drivers. The match method is following:
a) Punched the code button on Receiver, the indicator lighted, you can undertake to code.
b) In the case of the receiver indicator light, extended press the button on remote control until the indicator second lighted.
Complete send code command.
c) Once receiver received the code command, the indicator flash three times showing the code is successful, after lights
out.
There are three kinds of remote control dimmer.
Press the remote control button, dimming state change by the cycle: OFF->35%->100%->35%->OFF.
4、Remote Control Block Diagram:
5、Driver Block Diagram:

IKEA ICTD-KL-1 Specifications

General

Brand	IKEA
Model	ICTD-KL-1
Category	Remote Control
Language	English

Summary

Technical Parameters

Operating Voltage

Specifies the voltage range for the remote control operation.

Transmission Speed

Details the data transmission rate of the remote control.

Frequency Band

Indicates the radio frequency range used for communication.

Application and Pairing

Remote Control Matching Method

Step-by-step instructions for pairing the remote control with LED drivers.

Dimming Functionality

Describes the cycle of dimming states controlled by the remote.