IKEA ISANDE - Appliance Usage; Care and cleaning; Service

ENGLISH 7
Connect the appliance to the mains power
supply.
A beep may be emitted by some models,
to indicate that the temperature alarm has
intervened: press and hold the button to
switch off acoustic alarms. As applicable,
insert the anti-bacterial/anti-odour lter into
the fan as indicated on the lter package.
Note: after switching on, the refrigerator
needs approximately 4/5 hours to reach
the correct temperature for storing a normal
fridge load of food.
Firstuse
FastCooling
Press the “Fridge” button for 3
seconds before placing large
quantities of fresh food in the
refrigerator compartment.
When the function is active, the
sequence shown in the gure
will appear on the display.
This function is automatically
deactivated after 6 hours, or
manually by pressing the “Fridge”
button.
Refrigeratorcompartmenttemperature
A different temperature can be set
using the “Fridge” button.
Five adjustments can be made,
from warmer temperatures (left)
to the coldest temperature (right).
ResetAlarm
To deactivate acoustic signals, press the
“Reset Alarm” button.
On/Standby
Press for 3 seconds to switch off the
appliance. In Standby mode, no icons
are lit on the display and the light in the
refrigerator compartment does not come on.
To switch the product back on, simply press
the button briey again.
Note: this operation does not disconnect the
appliance from the power supply.
KeyLock
The key lock can be activated/deactivated
by pressing and holding the “Key Lock”
Dailyuse
A
B
C D GE
F
A
“Fridge / Fast Cooling” button
B
Refrigerator compartment temperature
C
“Reset Alarm” button
D
“On/Standby” button
E
“Key Lock” button
F
Freezer compartment temperature
G
“Freezer / Fast Freezing” button
Controlpanel