Why doesn't the light turn on in my IKEA Refrigerator?
If your IKEA Refrigerator lamp doesn't work, it might be in stand-by mode. Try closing and opening the door. If that doesn't work, contact the nearest Authorised Service Centre because the lamp might be defective.
Why is my IKEA ISANDE not cold enough / too cold?
The temperature inside the refrigerator might be too low or too high because of several reasons: * The temperature regulator is not set correctly, so set a higher/lower temperature. * The door is not closed correctly. * The food products temperature is too high, so let the food products temperature decrease to room temperature before storage. * Many food products were inserted at the same time, so insert less food products at the same time. * The door has been opened too often, so open the door only if necessary. * The Fast Freezing Function or the Shopping Function is switched on. * There is no cold air circulation in the appliance, so make sure that there is cold air circulation in the appliance.
Why is there water inside my IKEA ISANDE Refrigerator?
If water flows inside your IKEA Refrigerator, it could be due to: * A clogged water outlet. Clean the water outlet. * Food products blocking the water from flowing into the water collector. Ensure food products don't touch the rear plate.
What does it mean if a square symbol is shown instead of numbers on the Temperature Display of my IKEA Refrigerator?
If a square symbol appears instead of numbers on the temperature display of your IKEA Refrigerator, it indicates a temperature sensor problem. Contact the nearest After Sales Service. Note that the cooling system will continue to keep food products cold, but temperature adjustment will not be possible.
What to do if my IKEA ISANDE Refrigerator is not working?
If your IKEA refrigerator isn't working, it could be due to a few reasons: * The appliance is switched off, so switch it on. * The mains plug isn't correctly connected to the mains socket, so connect it correctly. * There's no voltage in the mains socket. Connect a different appliance to check, and contact an electrician if needed.
Why doesn't the compressor start immediately on my IKEA ISANDE?
It's normal for the compressor not to start immediately after starting the Fast Freezing or Shopping Function, or after changing the temperature. The compressor will start after some time.
What to do if the temperature in my IKEA ISANDE Refrigerator is too low or too high?
If the temperature in your IKEA Refrigerator is too low or too high, try setting a higher or lower temperature. Ensure the door is closing correctly. Allow warm food to cool before storing it, and avoid storing too many items at once. Also, limit how often you open the door. The Fast Freezing or Shopping function may be activated. Ensure there's cold air circulation inside the appliance.
What to do if the audible or visual alarm is on in my IKEA Refrigerator?
If the audible or visual alarm is activated in your IKEA Refrigerator, it could be due to the door being left open; in this case, close the door. If that is not the case, the temperature in the appliance might be too high, in this case, contact a qualified electrician or the nearest After Sales Service.
Why is the acoustic or visual alarm on my IKEA ISANDE Refrigerator?
The acoustic or visual alarm on your IKEA Refrigerator is likely activated because the door is left open. Close the door to resolve this.
Why is there too much frost and ice in my IKEA ISANDE?
Excessive frost and ice in your IKEA Refrigerator can be due to several reasons. The door may not be closing correctly, the gasket might be deformed or dirty (refer to "Closing the door" section), or food products may not be wrapped properly. Incorrect temperature settings or having the appliance fully loaded at the lowest temperature can also contribute. Try setting a higher temperature and ensuring proper food wrapping.
Safety guidelines for children and vulnerable individuals using the appliance.
Instructions for the safe and correct installation of the appliance.
Guidelines for safely connecting the appliance to the electrical supply.
Instructions for cleaning and maintaining the appliance.
Guidance on obtaining service and repairs for the appliance.
A checklist to ensure all installation steps are correctly performed before use.
Provides the external height, width, and depth of the appliance.
Specifies the necessary clearance for appliance installation and operation.
Guidance on choosing the optimal location for the appliance.
Specifications for ensuring adequate airflow around the appliance.
How to adjust and set the desired temperatures for fridge and freezer.
How to use the function for accelerated freezing of fresh food.
Initial steps and cleaning required before using the appliance for the first time.
Detailed instructions for cleaning the inside of the appliance before first use.
Guidelines for freezing fresh food efficiently in the freezer compartment.
Tips for storing frozen food, including initial run and drawer usage.
General| Voltage | 220-240 V |
|---|---|
| Installation Type | Freestanding |
| Number of Shelves | 4 |
| Number of Door Shelves | 3 |
| Type | Freestanding |
| Climate Class | ST |
| Color | White |
To Next Page
